CR10 v2 Full Plastic - BFULL version – plastic or metal case, interface 1 x Ethernet 10/100, 1 x USB Host, 1 x binary I/O, 2 x SIM, 2 x optional port

Application

CDMA router CR10 v2 provides wireless connection of various equipment and devices via Ethernet interface 10/100 or serial interfaces to the Internet or intranet. CDMA router CR10 v2 is an ideal wireless data transfer device for applications transferring large data loads because of fast data transfer speed in CDMA network reaching up to 14,7 Mbit/s (download) and up to 5,4 Mbit/s for upload. Because of CDMA technology is CR10 v2 professional wireless solution for data transfer from traffic and security camera systems, individual computers, LAN networks, automatic teller machines (ATM) and other self-service terminals, etc.

Selected applications

Energy and power industry – connection of wind power plants, solar panels, data transfer provided by gas, oil and water distribution networks and grids
Self-service terminals - connection of ATMs, payment and gaming terminals etc.
Transportation and security - wireless transmissions provided by cameras, connection of various sensors in trains, vehicles, container transportation assistance and river boats
IT and communication - safe connection of computers and LAN networks
Industry - interconnection of management and operational systems and sensors, SCADA, remote services
Metrology, alarm and warning systems - connection of sensors measuring water flow level in rivers, seismographs, rainfall meters, air pollution monitoring devices, meteorological stations

Key features

As a standard is CDMA router CR10 v2 equipped with one Ethernet 10/100, one USB Host port, one binary Input/output (I/O) port and one SIM card. To save and backup communication data version with 2 x SIM cards is available. The wide range of interface options of CDMA router further expands optional Port1 and Port2 selected by the customer – for Port1 is available Ethernet port 10/100, serial interface ports RS232/RS485/RS422/MBUS or (I/O - CNT). Port2 may be equipped with serial interfaces RS232/RS485/RS422/MBUS or (I/O - CNT). Another option is inserting of XC-SW board providing 3 x switched Ethernet 10/100 ports. CDMA wireless router is supplied either in a plastic or metal casing, based on the requirements of the customer.

Configuration is done via web interface protected by password. The CDMA router supports creation of VPN tunnels using technologies IPsec, OpenVPN and L2TP to ensure safe communication. Web interface provides detail statistics about the CDMA router activities, signal strength, detailed log, etc. Cellular router supports functions: DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, HTTPS, SSH, OSPF, RIP, BGP control by SMS and many other functions.

Other diagnostic functions ensuring continuous communication include automatic inspection of PPP connection offering an automatic restart feature in case of connection losses or hardware watchdog which monitors the status of the router. With the help of a special window (start up script window) you may insert Linux scripts for various actions. For some applications the key feature is possibility to create several different configurations for one CDMA wireless router, the so-called profiles (maximum of 4), and the option to switch between them (for example via SMS, binary input status, etc.). Cellular CDMA wireless router CR10 v2 supports automatic upgrade of configuration and firmware from server. This allows mass reconfiguration of many routers in one time. For CDMA CR10 v2 wireless router is possible to develop user modules that modify CDMA router behaviour as requested by customer.

For easy use additional software may be used - communication VPN server Smartcluster and software for router monitoring R-SeeNet.

Technical parameters

Supplied in the Basic or Full version
BASIC version – plastic or metal case, interface 1 x Ethernet 10/100, 1 x USB Host, 1 x binary I/O, 1 x SIM, 1 x optional port
FULL version – plastic or metal case, interface 1 x Ethernet 10/100, 1 x USB Host, 1 x binary I/O, 2 x SIM, 2 x optional port
Upon request an optional Port1: interface Ethernet 10/100, RS232 or RS485/RS422 or MBUS or I/O (CNT)
Upon request an optional Port2: interface RS232 or RS485/RS422 or MBUS or I/O (CNT)
Upon request version with 3 x switched Ethernet port 10/100 (XC-SW board, switched Ethernet at position Port1 and Port2 – available in Full version)
Non volatile M-RAM memory built inside the router may be used for storage of the router statistics or to run various applications
Maximum download speed 100 Mbit/s, upload 50 Mbit/s
Supports VPN for secure connection of equipment supporting standards – IPsec, X.509, OpenVPN or L2TP
Extended operational temperature range from -30°C to +60°C
Robust industrial construction, connection status monitoring and control, control via SMS and other advanced features based on Conel previous successful products - the complete list of routers may be find here
The router supports VRRP, DHCP, NAT, NAT-T, DynDNS, NTP, GRE, SSH, PPPoE Bridge, Dial-in, HTTPS, QoS, RIP, BGP, OSPF, PPTP, OSPF, RIP, BGP etc.
SNMP including SNMP traps for selected functions
SMS control of selected functions
Configuration via web interface (also remotely via network, implemented web server)
Information about the level of GSM signal, detailed event history log, etc.
Option to switch between SIM cards if the pre-set data limit is reached, for example during roaming detection, etc.
Easy firmware update
Bulk-configuration of CDMA CR10 v2 routers in the network
Compact dimensions, all necessary ports, LED, antenna connector at the front side of the router, option to be attached to a DIN bar
FTP server, option to create user modules in Linux

If the optional second port is installed in the Full (F) version, the order code generator will use: the name of the router interface + F + interface of the optional Port 1 + interface of the second optional (Port 2). Sample: CR10 v2F ETH RS232 set (supplied CR10 v2F router + 2 x ETH 10/100 + 1 x RS232 + 1 x USB HOST + 2 x SIM, 1 x I/O, accessories).

Accessories: magnetic antenna, power supply, UTP cable, DIN mount, CD manual